Have you been interested in non slip coating for the floor in your garage or workshop, but don’t know what to use? We will help you make a choice. There are a variety of non slip coatings available on the market today. We will discuss and compare the more popular alternatives so you can pick which one is best for your unique situation.
One well known brand in particular that is made from polyurethane is Durabak. It is an anti-slip floor coating that bonds to a variety of surfaces including concrete, wood, metal, fiberglass, etc. it is used in industrial shops, helicopter pads, marine boats, and even as a truck bed liner. It is sold in gallons and costs from $90 to $140 each, depending on the color you want.
The total price for materials can be figured by calculating the price of $1.15 per square foot. That’s what the average cost is to cover a floor with Durabak brand polyurethane coatings. It can be brushed or rolled on. It comes in all colors and has a very rough surface making it impossible to slip on.
Epoxy Non-slip Paint
Epoxy non slip coatings for floors come in kits with resin, hardener and aggregate. They come premixed and they even have spray on aerosol cans available. They are perfect for concrete wood and metal. These types of coating usually don’t require any primer and only minimal surface preparation.
Brush or roll on products cost about $90 a gallon on the high end and as low as $45 on the low side. One gallon covers about 100 square feet. Brush on and roll on epoxy non slip paints are the most popular anti-slip coatings used on concrete floorings.
If you have concrete, like most people, in your garage or work area, you are going to want to find some type of epoxy floor paint with non slip qualities. It is less expensive than using polyurethane, but doesn’t provide as thick of a coverage. It has a surface that is not as rough as polyurethane coatings provide. It is much more popular for use on concrete floors because it is easy to use and not too expensive.
This is a commercial coating that can be used on concrete, ceramic tile, quarry tile and terrazzo. If your floor is made of a tile that you don’t want to cover with a solid color and change the look, this may be the best option for you. Tight-grip is made with a trade secret chemical compound.
It works by increasing friction on the surface. When your foot applies pressure, it acts like several little suction cups that you cannot see. They say it increases traction on wet surfaces by 62%.The prices are not readily available on their website, but there is a number you can call for prices and other information. The number to call, regarding Tight-Grip, is 1-800-526-5398. (www.tight-grip.com)
There is a huge variety of anti-slip solutions available. The three above examples represent the most effective solutions for floors in your garage or workshop. The first two are the most recommended and we do not know enough about the Tight-grip product to recommend it strongly, but it may be worth looking into. Epoxy non slip floor paints are perhaps the most widely used and probably the best economical solution for most situations.
If you have a concrete floor, epoxy anti-slip paint is going to be right up your alley. However, if you happen to have a tile floor in your work area, you are going to want to try something more like Tight-Grip. That is why we mentioned it here, because some of you may not wish to alter the look of your tiled floor by painting over it with an epoxy or polyurethane coating. Whatever solution you choose for your garage or workshop, make sure you follow the manufacturer’s directions to the tee when applying.