If you have a lot of wood in your home then you may be well aware of the fact that it can get a little heavy after a while. Having the same tone of wood throughout your home can get incredibly boring and do absolutely nothing for its appeal to either you or others.
You also need to be aware of how it is used and how prone to wear it is because water, stains and heavy use can cause damage over a sustained period of time. There is one way that you can kill two birds with one stone though. You can make your wooden interiors and furniture more interesting and more prone to standing the test of time with a penetrating oil finish.
The penetrating oil finish products are readily available on the market today and offer all homeowners an affordable option that gives them chance to change the appearance of their interiors. They are designed to serve this purpose as well as penetrating the wood’s surface in order to strengthen it to the point at which your furniture could actually be used outdoors and be able to resist the elements effectively over an extended period of time.
Oil Finish Benefits
The beauty of a penetrating oil finish is that it does not create a hard and built up finish to the wood like varnishes and other similar products do. Instead, because the oil is absorbed, it treats the wood gently and then provides a soft finish that darkens the wood slightly without actually making it look anything but beautiful.
There are different types of finishes for you to choose from though, including mahogany, teak, rosewood and other such exotic woods, maple, oak and other such hardwoods…. There are so many choices out there that you can seriously spend hours deciding if you are not clear in what you want. You can use the penetrating oil finish on almost any wooden surface in your home but make sure that you can keep it clear for 24 hours to allow it to dry.
The penetrating oil finish is not something you can just decide to do and then get on with. You do need to consider several factors first. For example, you need to check out what wood you intend to finish and see just how easy it will be to do. For example, those woods that are considered to be tight grained are perhaps the best to treat because it brings the full rich colour to the surface. This includes birch and cherry woods, amongst others. If your wood has looser grains then it may be a bit more difficult to coax the colour out and achieve the effect you want.
Before applying the penetrating oil finish, you will need to not only clean but finely sand the surface of the wood. Use fine sandpaper to just take the top off the surface, remove any excess dust and then apply the finish. This is because the sandpapering will increase the rate of absorption.
Also, after you have applied the finish with a clean cloth, wait for an hour and then remove the excess oil that rests on the surface so the finish is not too heavy. You will not believe the final effects because the penetrating oil finish really is beautiful and will enhance any room of any home.