For those of you that do not know a rip fence is an attachment to a table saw. Table saws have this guide running from the front of the table to the back of the table, running parallel to the cutting edge of the blade. It is used to guide the wood through the cut for the entire length of the board.

Many table saws that you can find on the market have a 30 or 50 inch rip fence capacity, although rip fences can be found in many other sizes ranging from 26 inches to 122 inches. This article will go over a few factors that you should consider when selecting the rip fence capacity for your table saw.

Is a 30 Enough

The best way to join your baseboard molding in the corners is to cut a coped joint. This is a joint where one of the pieces is cut to be squared and the other is cut to fit over it creating a tight uniformed look. Below you will find steps to helping you with this project.

Tips

• Do not twist the coping blade to follow your base line drawing. Keep the cuts simple and remove one small piece then another to follow the curved lines.

• Use an extra piece of trim to practice on first.

There are many accessories that you can acquire for your table saw in order to make it more versatile, safe, powerful, accurate, or convenient. One such accessory is the table saw extension. What this accomplishes is, as you might imagine from the name, extends the capability of your saw. Specifically, it extends the real estate on the table surface allowing you to work with larger pieces of stock. More specifically, this is an aid when crosscutting lumber or sawing sheets of plywood or similar material.

It has been roughly two hundred years ago, more or less, when the carpenter and the cabinetmaker’s craft of woodworking took a bold new turn. Rather than sawing wood using a straight line of teeth that ground back and forth, the circular saw blade was invented and the rest, as they say, is history. Cutting stock was now continuous and faster than anyone had ever seen. The (simi) modern table saw had been born.

A table saw splitter is a very important component for a table saw and it ensures safely while carrying out its operation. It can be extremely dangerous if used without a saw splitter and in severe cases it can also cause death.

The safest way to use a table saw is to use it together with a splitter and a table saw blade guard. The function of the blade guard is to mark a harmless region about the blade, which keeps the user’s fingers in the opposite side of the guard, out of the blade’s way.

The Functions of a Splitter